Planet Networking & Communication LCG-300 Series User Manual page 106

Object
GRE Tunnel
Add GRE Tunnel
Object
Active
Tunnel Name
Through
Peer WAN IP Address
Peer Netmask
Peer Tunnel IP
Address
Local Tunnel IP
Address
Local Netmask
Set the function as enable or disable.
Go to the Add GRE Tunnel page to add a new tunnel.
Figure 4-8-5: GRE Tunnel
Check the box to enable the function.
Enter any words for recognition.
This is only available for host-to-host connections and specifies to which
interface the host is connecting.
1. LAN.
2. WAN 1.
3. WAN 2.
Input the IP address of the remote host. For instance, "210.66.1.10".
The remote subnet in CIDR notation. For instance, "210.66.1.0/24".
Input the Tunnel IP address of remote host.
Input the Tunnel IP address of remote host.
Input the Tunnel IP address of the LoRaWAN Gateway
- 106 -
Industrial LoRaWAN Gateway
Description
Description
LCG-300 series