Digital Input / Output - Planet Networking & Communication LCG-300 Series User Manual

4.4.10

Digital Input / Output

This page provides Digital Input / Output setting as shown in
Object
•
Enable
•
Condition
•
Event Description
Figure 4-4-26: Digital Input / Output
Description
Check the Enable checkbox to enable Digital Input / output function.
Uncheck the Enable checkbox to disable Digital input / output
function.
As Digital Input:
Allows user to select High to Low or Low to High. This means a
signal received by system is from High to Low or From Low to
High. It will trigger an action that logs a customized message or
issue the message from the switch.
As Digital Output:
Allows user to select High to Low or Low to High. This means that
when the switch's power fails or port fails, the system will issue a
High or Low signal to an external device such as an alarm.
Allows user to set a customized message for Digital Input function
alarm.
- 59 -
Industrial LoRaWAN Gateway
Figure 4-4-26.
LCG-300 series