Wan Advanced - Planet Networking & Communication LCG-300 Series User Manual

4.5.3

WAN Advanced

This page is used to configure the advanced parameters for Internet area network which connects to
the WAN port of your LoRaWAN Gateway as shown in
for Load Balance Weight, Detect Interval, Detect Link Up Threshold, etc.
Object
Load Balance Weight
External Connection
Detection
Detect Interval
Detect Link Up
Threshold
Detect Link Down
Threshold
Custom Detect Host
Figure
Figure 4-5-3: LAN Setup
Load Balance Weight allows you to set a relative weight (from 1 - 10)
for each WAN port.
Enable to detect the status of WAN connection.
Set the detect interval as you need.
The recommended value is 5 (default).
Set the times for detecting link up.
The recommended value is 8 (default).
Set the times for detecting link down.
The recommended value is 3 (default).
The host is used to check whether the internet connection is alive or
not.
- 67 -
Industrial LoRaWAN Gateway
4-5-3. Here you may change the setting
Description
LCG-300 series