Web Filtering - Planet Networking & Communication LCG-300 Series User Manual

Object
Anywhere (of destination
IP Address)
Destination Port
Protocol
4.8.4

Web Filtering

Web filtering is used to deny LAN users from accessing the internet as shown in
those URLs which contain keywords listed below.
Object
Web Filtering
Add Web Filtering Rule
Object
Status
Filter Keyword
Check the box if you want to control all web sites, meaning the LAN
user can't visit any web site.
Input the port of destination IP Address which you want to block.
Leave it as blank if you want to block all ports of the web site.
Select the protocol type (TCP, UDP or all).
If you are unsure, please leave it to the default all protocol.
Figure 4-7-6: Web Filtering
Set the function as enable or disable.
Go to the Add Web Filtering Rule page to add a new rule.
Figure 4-7-7 Web Filtering Rule Setting
Set the rule as enable or disable.
Input the URL address that you want to filter, such as
www.yahoo.com.
- 96 -
Industrial LoRaWAN Gateway
Description
Figure
Description
Description
LCG-300 series
4-7-6. Block