Priority - Planet Networking & Communication LCG-300 Series User Manual

IGMP
IPv6
DHCP
DDNS
MAC Address
Clone
4.5.1

Priority

This page provides WAN priority setting as shown below.
Object
WAN Priority
Object
Active
Group Name
Path
Service Port or Group
Disable or enable the IGMP function.
The default configuration is disabled.
Allows setting IPv6 WAN interface.
Allows setting DHCP Server.
Allows setting DDNS and PLANET DDNS.
Allows setting WAN MAC Address Clone.
Figure: Priority
 Auto: WAN Ethernet is first priority and second priority is NR/LTE. The default
is auto.
LTE/NR Only: The priority is only LTE/NR

Ethernet Only: The priority is only Ethernet.

 LTE/NR First: LTE/NR is first priority and second priority is Ethernet
 Load Balance: The priority is Load Balance.
 Enable / Disable the Active
 Setting the Group Name.
 Setting the SD-WAN To / To SD-WAN
 Setting the Service Port or Group Border Gateway Protocol
- 64 -
Industrial LoRaWAN Gateway
Description
Description
LCG-300 series