Wolf Sub-Zero ICB400 Series Service Manual page 88

International W
International W
Refrigerator Evaporator Thermistor Removal
(Model ICB427R Only)
The refrigerator evaporator thermistor is inserted into
the third opening from the top in the evaporator fins
left side, extending approximately to the center of
the evaporator.
To remove a evaporator thermistor, the left false wall
and cold plate must be removed first, then
(See Figure 7-19):
1. Pull thermistor from evaporator fins.
2. Cut the thermistor's wire leads 152 mm (6'') to 305
mm (12'') from the back wall, then pull the thermis-
tor from compartment.
ine Storage
ine Storage
(ICB400)
(ICB400)
6-25
Series
Series
Component Access / Removal
Evaporator Thermistor
Figure 6-59. Evaporator Thermistor
7011544 - Revision A - November, 2008