Wolf Sub-Zero ICB400 Series Service Manual page 11

International W ine Storage Series
International W ine Storage Series
Installation Information
(ICB400)
(ICB400)
Door Stop Adjustment (ICB427 & ICB427R)
Models ICB427 and ICB427R have a 90° door stop
cam built into the hinge system. The 90° door stop cam
is located in the center portion of the hinge.
To adjust the stop, use a standard straight-blade screw-
driver to rotate cam until stop point is reached. (See
Figure 2-11)
90° Stop Cam
NOTE: Door stop adjustment must be performed at
both bottom and top hinges.
Figure 2-11. Door Stop Adjustment
2-6
7011544 - Revision A - November, 2008