Wolf Sub-Zero ICB400 Series Service Manual page 59

Sealed System Information
Model ICB427R Refrigerator Sealed System
Components and Their Role:
Compressor (Figure 4-7)
The compressor creates a high side and low side pres-
sure difference in the sealed system by compressing
the refrigerant gas, thus raising the pressure and tem-
perature. This high-pressure/high-heat gas exits the
discharge line and is routed to the condenser.
Condenser (Figure 4-8)
The high-pressure/high-heat gas travels through the
condenser, where the heat is dissipated by cooler air
being drawn over the condenser tubing. This changes
the gas into a high-pressure warm liquid before it enters
the high-side filter-drier.
Filter-Drier (Figure 4-9)
The high-pressure warm liquid travels through the high-
side filter-drier, where moisture is removed from the
refrigerant before it enters the capillary tube.
7011544 - Revision A - November, 2008
International W ine Storage
International W ine Storage
COMPRESSOR
COMPRESSOR
COMPRESSOR
4-6
Series
Series
(ICB400)
(ICB400)
Figure 4-7. Compressor
CONDENSER
Figure 4-8. Condenser
CONDENSER
FILTER-DRIER
Figure 4-9. Filter-Drier