Table of Contents
Advertisement
Controls and Indicators
1.3 Controls and Indicators
LCD Display
The FACP uses an 80-character
(4 lines X 20 characters) high viewing angle
LCD display. The display includes a long life
LED backlight that remains illuminated. If AC
power is lost and the system is not in alarm, the
LED backlight will turn off to conserve batteries.
LED Indicators
LED indicators are provided to annunciate the following conditions:
• AC Power (green)
• Fire Alarm (red)
• Supervisory (yellow)
• Trouble (yellow)
• Maintenance/presignal (yellow)
• Alarm Silenced signals (yellow)
• Disabled (yellow)
• Battery fault (yellow)
• Ground fault (yellow)
Key Panel
Mounted on the main circuit board, the key panel includes a window for the LCD display and LED
indicators as listed above. The key panel, which is visible with the cabinet door closed, has 25
keys, including a 16 key alpha-numeric pad similar to a telephone keypad.
Function keys:
• Acknowledge/Step
• Alarm Silence
• Drill
• Reset (lamp test)
Service/program keys:
• Keys labeled 1 to 9
• * key
• # key
• 0 (recall) key
• 1st Event key
• Clear key
• Escape key
• Mode key
• Four cursor keys (up, down, left and right)
• Enter key
Local Piezo Sounder
A piezo sounder provides separate and distinct pulse rates for alarm, trouble and supervisory
conditions.
FireWarden 100-2/E — P/N 52778:A 11/04/2005
HONEYWELL LIFE SAFETY
SYSTEM ALL NORMAL
10:00A 012106
AC POWER
FIRE ALARM
SUPERVISORY
1
2
3
1
st
ABC
DEF
EVENT
4
5
6
CLR
ENTER
GHI
JKL
MNO
7
8
9
ESC
TUV
WXY
PRS
*
0
#
MODE
-/.
QZ
RECALL
Figure 1.3 Membrane/Display Panel
Product Description
MAINTENANCE
ALARM
SILENCED
DISABLED
TROUBLE
BATTERY
GROUND
ACK/STEP
ALARM
SILENCE
DRILL
HOLD 2 SEC
RESET
15
Advertisement
Table of Contents
