Honeywell NOTIFIER FireWarden-100-2 Instruction Manual page 84

Programming
The following screens will be displayed for each selection:
Enabled
Pressing 1 while viewing NAC Screen #1 will cause the display to change to Enabled No. This will
prevent the selected main circuit board NAC from activating its devices. Each press of the 1 key
will cause the display to toggle between Enabled Yes and Enabled No.
NOTE: The programming for NAC 1 will determine the operation of the remote power supply
sync.
84
NAC #
1=ENABLED
2=TYPE
3=SILENCEABLE
NAC Screen #1
NAC #
1=AUTO SILENCE
2=CODING
NAC Screen #2
NAC #
1=ZONE
00 00 00 00 00
2=SIL INHIBITED
NAC Screen #3
NAC #
1=SYNC TYPE
NAC Screen #4
Master Programming Level
YES
BELL
YES
00
TEMPORAL
NO
S
FireWarden 100-2/E — P/N 52778:A 11/04/2005