Honeywell NOTIFIER FireWarden-100-2 Instruction Manual page 53

Master Programming Level
1=STANDARD ADJECTIVE
2=STANDARD NOUN
3=CUSTOM ADJECTIVE
4=CUSTOM NOUN
Noun/Adjective Screen
**********************
1=BASEMENT
2=BOILER RM
3=CLASSROOM
**********************
1=CLOSET
2=CORRIDOR
3=ELECTRIC RM
**********************
1=ELEVATOR
2=ENTRANCE
3=FLOOR
**********************
1=GARAGE
2=HALLWAY
3=HVAC RM
FireWarden 100-2/E — P/N 52778:A 11/04/2005
Pressing 2 while viewing the Noun/Adjective Screen will cause the following screen(s) to be
displayed. Note that the keyboard down arrow key must be pressed to see all the Noun screens.
Press the number corresponding to the noun that is to be used as a descriptor for the location of the
detector currently being programmed. When a noun has been selected, it will appear at the top of
the display as indicated by the asterisks.
Noun Screen #1
Noun Screen #2
Noun Screen #3
Noun Screen #4
**********************
1=KITCHEN
2=LOBBY
3=OFFICE
Noun Screen #5
**********************
1=PATIENT
2=RESTROOM
3=ROOM
Noun Screen #6
**********************
1=STAIRWAY
2=STOREROOM
3=WING
Noun Screen #7
**********************
1=ZONE
Noun Screen #8
Programming
53