Master Programming Level
3.6.7 History
The History option allows an authorized user to view or erase events which have occurred in the
PROGRAMMING
control panel. Pressing 1 while viewing Programming Screen #3 will display the History options
1=HISTORY
as shown in the following display:
2=WALKTEST
3=OPTION MODULES
Programming Screen #3
View Events
Pressing 1 while viewing the History Screen will allow the user to select the events to be viewed as
HISTORY
illustrated in the following:
1=VIEW EVENTS
2=ERASE HISTORY
History Screen
While displaying the View Events screen, press 1 to view all events, 2 to view only alarms or 3 to
view other events. Use the up and down arrow keys to scroll through all of the displayed events.
Erase History
The Erase History option allows a user to erase all events from the history file. This will provide a
clean slate in order to use the history file to track future events. Pressing 2 while viewing the
History Screen will display the following screen:
Pressing 1 while viewing the Erase History Screen will erase all events from the History file.
During this process, the display will read as follows:
After the History file has been erased, the display will return to the History Screen.
FireWarden 100-2/E — P/N 52778:A 11/04/2005
HISTORY
1=VIEW EVENTS
2=ERASE HISTORY
History Screen
HISTORY
1=VIEW ALL
2=VIEW ALARMS
3=VIEW OTHER EVENTS
View Events Screen
ERASE HISTORY
PROCEED ?
1=YES
Erase History Screen
ERASING HISTORY
PLEASE WAIT
Erase History Wait Screen
2=NO
Programming
91