Front Panel Controls And Signallings - Honeywell MA Series Operation Manual

MAx panel Fire Detection System

1.3 FRONT PANEL CONTROLS AND SIGNALLINGS

EVACUATION: Command for activating the siren output and all output modules programmed with type SW =
SND in the absence of alarms and faults. A level 2 password is required to activate this function.
END DELAY:
This button is active only in the event of an alarm if the immediate activation of the sounder outputs has been
excluded in the exclusion menu. The panel delays the activation of the abovementioned outputs for the
programmed times. During the delay time, the active delay LED flashes and it is possible to reset the current
delay via the End Delay button.
SILENCE BUZZER:
By pressing this button, the operator can silence the panel buzzer. This allows the user to perform a RESET.
SOUNDER ON/OFF SILENCE: A level 2 password is required for this function.
The following devices are activated in the event of an alarm:
•
Sounder output
•
Output modules programmed with SW type ID=SND
•
The output modules activated for CBE associations
SILENCE RESOUND:
By pressing this button, you can deactivate the following devices:
•
Siren output
•
Output modules programmed with type ID SND and enabled for silencing
•
All output modules activated for CBE associations and enabled for silencing
Pressing this button again will reactivate:
•
Siren output
•
Output modules programmed with type ID SND
•
All the output modules deactivated in the previous silencing
RESET:
This function requires a level 2 password. Pressing this button clears alarms and faults from the memory. It
deactivates the sounder and turns off all light signals of sensors in the alarm.
6
Buttons with dedicated functions
M-167.3-Serie-MA-EN / 11.2021