Toshiba e-STUDIO5540C Service Manual page 1067

Multifunctional digital color systems

Hide thumbs Also See for e-STUDIO5540C:

e-STUDIO5560C/6560C/6570C (Ver08)

Feeding retry counter

upper limit value (T-

Feeding retry counter

Counter for special

When the number of feeding retry (08-6230 to 08-6235)

exceeds the setting value, the feeding retry will not be

performed subsequently. In case "0" is set as a setting

value, however, the feeding retry continues regardless

of the counter setting value.

In this equipment, a toner image is formed on the

transfer belt prior to a paper feeding.When the feeding

retry occurs and the transport timing is delayed, the

toner image on the transfer belt is cleaned off without

the 2nd transfer since the paper cannot be reached for

the 2nd transfer process.After that, the toner image

formation is retried while the paper is waited.In this

case, the toner for this image formation is consumed

wastefully since the toner image on the transfer belt is

already cleaned off, even though the printing is normally

completed.Therefore, note that the excessive toner will

be consumed consequently when the upper limit value

of feeding retry counter is set larger or set as "0" (no

limit).The toner is also consumed wastefully when the

paper misfeeding occurs. Replace the roller at earlier

timing if the paper misfeedings have occurred

Counts the number of times of the feeding retry from

Counts up when the registration sensor is ON in the

special paper mode.