Toshiba e-STUDIO5540C Service Manual page 1068

Sub
05/08 Mode Element
element
08 Setting Counter Feeding
Mode system /
Paper
transport
08 Setting Counter Toner Backup counter for
mode rotation time of toner
refill motor
08 Setting Counter Toner Backup counter for
mode rotation time of toner
refill motor
08 Setting Counter Toner Backup counter for
mode rotation time of toner
refill motor
08 Setting Counter Toner Backup counter for
mode rotation time of toner
refill motor
08 Setting Counter PM Photoconductive
mode counter drum(K)
e-STUDIO5560C/6560C/6570C (Ver08)
Sub-
Item Subitem Code
code
6245
6249
6249
6249
6249
6250
Default Acceptable
Details
value value
Feeding retry counter 10 8 digits
upper limit value (O-
LCF)
0 Y 0 8 digits
1 M 0 8 digits
2 C 0 8 digits
3 K 0 8 digits
0 Present number of 0 8 digits
output pages
132
RAM Contents
M When the number of feeding retry (08-6242) exceeds
the setting value, the feeding retry will not be performed
subsequently. In case "0" is set as a setting value,
however, the feeding retry continues regardless of the
counter setting value.
In this equipment, a toner image is formed on the
transfer belt prior to a paper feeding.When the feeding
retry occurs and the transport timing is delayed, the
toner image on the transfer belt is cleaned off without
the 2nd transfer since the paper cannot be reached for
the 2nd transfer process.After that, the toner image
formation is retried while the paper is waited.In this
case, the toner for this image formation is consumed
wastefully since the toner image on the transfer belt is
already cleaned off, even though the printing is normally
completed.Therefore, note that the excessive toner will
be consumed consequently when the upper limit value
of feeding retry counter is set larger or set as "0" (no
limit).The toner is also consumed wastefully when the
paper misfeeding occurs. Replace the roller at earlier
timing if the paper misfeedings have occurred
frequently.
M The rotation time of toner refill motor is stored when the
toner cartridge becomes empty.
M The rotation time of toner refill motor is stored when the
toner cartridge becomes empty.
M The rotation time of toner refill motor is stored when the
toner cartridge becomes empty.
M The rotation time of toner refill motor is stored when the
toner cartridge becomes empty.
M
Proce Servic
dure e UI
1
14
14
14
14
4