Chassis
REMOVAL OF EXTERNAL WHEEL COMPO-
NENTS
To proceed with the removal of the external wheel
components, proceed as described:
•
Remove the six fixing screws (9) of the
tone wheel / front disc.
•
Remove the tone wheel (10) (if
present).
•
Remove the brake disc (11).
Checking
FRONT WHEEL BEARINGS
Check the bearings installed on the wheel.
CHECK THE CONDITION OF ALL COMPONENTS AND OF THE COMPONENTS INDICATED AS
FOLLOWS IN PARTICULAR.
CHECKING ROTATION
•
Manually rotate the inner race of each bearing. The race must turn smoothly without im-
pediment or noise.
If one or both bearings do not fall within the control parameters:
•
Replace both wheel bearings.
CHECKING RADIAL AND AXIAL PLAY
CHAS - 168
TUAREG 660