TUAREG 660
•
Clean the engine oil level dipstick (1)
and put it back in without screwing it in
•
Remove it again and check the engine
oil level
•
The level is correct if it reaches the
''MAX'' level approximately. Otherwise
top off the engine oil
CAUTION
THE OIL LEVEL MUST NEVER DROP BELOW THE MINI-
MUM MARKING OR EXCEED THE MAXIMUM MARKING;
AN OIL LEVEL NOT WITHIN THE MINIMUM AND MAXIMUM
MARKINGS MAY CAUSE SEVERE ENGINE DAMAGE
Replacement
NOTE
HOT OIL IS MORE FLUID AND WILL DRAIN OUT MORE EASILY AND COMPLETELY.
For the replacement of the engine oil, the sump
guard must be removed beforehand. Then pro-
ceed as described:
•
Place a container with suitable capaci-
ty under the drainage plug.
•
Unscrew and remove the drain cap.
•
Unscrew and remove the filler cap.
Maintenance
MAIN - 39