Throttle Body Removal - APRILIA TUAREG 660 Service Station Manual

Maintenance
•
Remove the air filter.
Throttle body

Throttle body removal

To remove the throttle body, the fuel tank and the
complete filter housing must first be removed.
Then proceed as described:
•
Remove the fixing screw (1) of the air
pressure sensor and disconnect the
connector (2) from the sensor itself.
•
After disconnecting the connectors (3)
from the ECU, free the VEHICLE wiring
harness and the rear stop switch wiring
harness (4) from the cable guide.
•
Remove the ECU (5).
MAIN - 42
TUAREG 660