Front Brake Caliper Removal - APRILIA TUAREG 660 Service Station Manual

TUAREG 660
Removal
NOTE
THE FOLLOWING OPERATIONS REFER TO A SINGLE BRAKE CALLIPER BUT ARE VALID FOR
BOTH.
To remove the front brake calliper, after having
adequately protected the rim to prevent it from
coming into contact with the brake fluid when re-
moving the front brake calliper, it is necessary to
drain the front brake system. Then proceed as de-
scribed:
•
Unscrew and remove the special
screw complete with washers fixing the
brake hose to the calliper.
CAUTION
ALWAYS USE NEW SEALING WASHERS DURING REAS-
SEMBLY.
•
Undo and remove the two screws fixing
the front brake calliper to the stanchion
of the fork.
•
Remove the brake calliper together
with the support.
Braking system
BRAK SYS - 239