Removal Of Internal Wheel Components (Rear) - APRILIA TUAREG 660 Service Station Manual

TUAREG 660
REMOVAL OF INTERNAL WHEEL COMPO-
NENTS
To proceed with the removal of the internal wheel
components, proceed as described:
•
Working on the right side of the wheel,
remove the oil seal (19).
•
Using special pliers, remove the circlip
(20).
•
Using a generic puller, proceed with
the extraction of the bearing as descri-
bed:
•
Insert the first part of the tool (A) on the
bearing and screw the pin (B).
•
Insert the second part (C) and the nut
(D).
•
Tighten the nut while keeping the pin
(A) still, to extract the bearing.
Chassis
CHAS - 177