Chassis
•
Insert the washer (10) and the nut (11)
on the pin, tightening it to torque.
•
Position the "T" bush (12) on the swing-
arm if previously removed.
•
Connect the dual linkage to the swing-
arm and fasten it using the appropriate
screw (13) and relative nut (14) tight-
ening it to torque.
•
Reassemble the rear brake calliper on
the swingarm connecting the brake
hose and the rear ABS sensor wiring
harness to the three indicated cable
guides.
•
reassemble the rear mudguard, the chain guard and the rear wheel, checking the correct
tension of the chain.
Pinion
CHAS - 194
TUAREG 660