Chain Sliders; Chain Guard - APRILIA TUAREG 660 Service Station Manual

Chassis
•
Use the adjuster screw (3) to adjust the
chain clearance checking that the ref-
erences (4) match on both sides of the
vehicle.
•
Using a gauge make sure that the dis-
tance is the same on both sides.
•
Tighten the two lock nuts (2).
•
Tighten the nut (1).
•
Check the chain clearance.

Chain sliders

To remove the chain sliders, follow the procedure
described below:

CHAIN GUARD

•
Place the vehicle on the specific rear
support stand (optional).
•
Remove the three fixing screws.
•
Remove the chain guard.
CHAS - 204
TUAREG 660