Right Rider Footrest - APRILIA TUAREG 660 Service Station Manual

Chassis
RH RIDER FOOTREST
To disassemble and remove the right rider footrest
it is necessary to first remove the frame protection.
Then proceed as described:
•
Unscrew the two fixing screws (1) of
the rear brake master cylinder (2).
•
Release the brake lever return spring
(3) and remove it.
•
Unscrew the fixing screw (4) of the
brake lever (5) taking care to retain the
two rubber o-rings (6) and the washer
(7).
•
Remove the split pin (6) of the pin and
the washer (7).
CAUTION
ALWAYS USE A NEW SLIT PIN DURING REASSEMBLY .
CHAS - 208
TUAREG 660