TUAREG 660
•
Remove the 4 gaskets (11).
•
Using a suitable punch, remove the
roller bearings.
Specific tooling
020376Y Adaptor handle
020441Y 26 x 28 mm adaptor
•
To remove the chain guide, refer to the specific procedure in the "chain guide sliders" para-
graph, in the "frame and suspension" chapter.
See also
Chain sliders
Checking
CAUTION
CHECK THAT NO COMPONENT IS NOTICEABLY DISTORTED, DAMAGED, CRACKED AND/OR
DENTED.
REPLACE ALL DAMAGED COMPONENTS.
ROLLER CASINGS
Turn the roller casings manually; they must rotate smoothly, continuously and silently.
There must be no axial clearance.
Replace the roller casings that present these problems.
Apply grease on the rollers.
GASKETS
Check that the gaskets are in good conditions; replace them if they show signs of damage or excessive
wear.
Chassis
CHAS - 191