Table of Contents
Advertisement
6 CONTROLS
6.5.15 CHANGE PIN _______________________________________________________
Using the PIN Menu Buttons 2 and 3 to arrow down to the bottom of the
list, and Button 4 to select Change Pin, this gives you the option to change
from the default Owner's PIN Number.
6.5.16 BRIGHTNESS _______________________________________________________
Using the PIN Menu Buttons 2 and 3 to arrow down to the bottom of the
list, and Button 4 to select Brightness, this gives you the option to change
from day to night mode.
The top line is used to alter the brightness in daytime mode. The middle
line is used to alter the brightness in night time mode. Bottom line is used
to set the threshold at which the screen automatically changes from day-
time to night time mode and vice-versa.
6.5.17 LANGUAGE MENU___________________________________________________
When you access the language selection page, the check-mark appears
next to the selected language.
When the check-mark is moved up and down, the language does not
change until Button 4 is used to select and store the language. At that
point the title bar changes to the new selected language.
The options will always be in the correct language.
English, Deutsch, Francais, Dansk, Svensk, Nederlands and Español.
6.5.18 BACKLAPPING– CYLINDER UNITS ONLY________________________________
To enable backlapping,
8. Start the machine (6.3.4). Reduce Engine Speed to Minimum Low
Idle.
9. From the home screen, Navigate through screens: MAIN MENU >
SETTINGS > PIN.
10. Enter Pin "1001" and confirm with Button 4.
11. Scroll to Enable and select using Button 4. Text will change to
Green once selected.
12. Exit the menu's using Button 1 returning to Home Screen. The Cut-
ting Indication symbol will have changed to the Backlap symbol.
en-52
Change Pin - Owner
New PIN: * * * *
Confirm: 1 _ _ _
Brightness
Language
English
Nederlands
Deutsch
Español
Francais
Dansk
Svensk
Backlapping
Backlap Enable
Backlap Disable
100%
50%
814
Advertisement
Table of Contents
