Table of Contents
Advertisement
ICONS
1
11
2
12
3
13
4
14
15
5
6
16
7
17
8
18
H
O
2
9
19
10
6.3.3 HOME SCREEN _____________________________________________________
This screen shows the Cutter Switch in the OFF position, the TST™ is in
operation and the Park Brake is applied.
Note: The TST™ (Tilt Sensor Technology) is an optional active safety de-
vice to warn you when the machine is being used in unsuitable conditions.
If TST™ is not installed the TST™ icon will be crossed through.
Ransomes Jacobsen recommends that the owner/user of the machine
completes a site specific risk assessment of the area to be mown prior to
operation of the machine.
The slope monitoring system "TST™" (Tilt Sensor Technology) is a slope angle warning system only.
It does not increase the safe working slope beyond that of the declared safe slope.
1.
Park Brake Engaged
2.
DPF Inhibit
3.
DPF Regeneration Request
4.
DPF Regeneration Ongoing
5.
TST™ Active (Optional
6.
TST™ Not Active (Optional)
7
Cutter Indicator (Flashes if not in off position on start up)
8.
Water In Fuel Warning
9.
Transport Lock
10.
Foot Pedal Warning (Flashes if not in neutral position on start up)
11.
Seat Warning (Flashes if not occupied or disconnected on start up)
12.
Fuel Indicator (Below bar graph)
13.
Engine Temperature Indicator (Below bar graph)
14.
Check Engine
15.
Traction Boost / Weight Transfer
16.
Engine Able To Start (Green)
17.
Engine Unable To Start (Red)
18.
Fan
19
Backlap
!
WARNING
CONTROLS 6
1234
123.4 Hours
P
®
TM
en-35
Advertisement
Table of Contents
