Table of Contents
Advertisement
INTRODUCTION 2
2.1
IMPORTANT __________________________________________________________
The Ransomes MT503 is a Diesel engined self propelled mower. The hydraulic systems are for the traction drive,
the cutting unit lift and lower and cutting unit drives and steering.
IMPORTANT: Ensure the maintenance indicated in this manual is conducted to make sure that the quality of cut
is kept at a high level.
This SAFETY AND OPERATORS MANUAL is part of the machine and must stay with the machine always.
Suppliers of both original and used machines need to keep the documentation that comes with the machine.
You must use the machine to cut the grass only and not for any other purpose. Compliance with the conditions of
operation, service and repair specified by the manufacturer, are understood to be part of the correct use.
ALL operators MUST read through this manual and understand the Safety Instructions, controls, lubrication and
maintenance procedures.
Make sure that you obey all safety and road traffic regulations.
You must not make any changes to the machine that the manufacturer does not approve. This type of change
can release the manufacturer from the liability for any damage or injury.
Discard worn parts, taking note of the environmental result, use the systems available in the country where the
machine is used. When the machine is at its end of life, there are guidelines in this manual for the removal of the
machine from use.
Use only Ransomes Jacobsen Limited Genuine spare parts to make sure that European conformity is controlled.
2006/42/EC
en-5
Advertisement
Table of Contents
