Table of Contents
Advertisement
12.10
TORN CROWNS _________________________________________________
Possible Cause
Too much material.
Worn blade edge.
Cutting too fast for conditions.
Cutting Unit not set 'On-Cut' correctly (Cylinder Only)
"Torn Crowns" This problem is identified when
clumps of grass (Crowns) are torn up rather
than cut.
TN1234
Cut more frequently, increase HOC.
Sharpen or Replace damaged blades / Sharpen
cylinder.
Decrease the cutting speed.
Set Cylinder to bottom blade On Cut (sect 9.3)
QUALITY OF CUT 12
Correction
en-125
Advertisement
Table of Contents
