Table of Contents
Advertisement
6 CONTROLS
6.6.3 WARNING SLOPE ANGLE – INHIBIT CUT ________________________________
If the slope angle continues to increase the screen will display this
warning which indicates that the cutters will be prevented from
starting if not already running, or re-started if running then stopped.
An audible warning will be sounded 4 times at 4 second intervals.
This will continue until the machine has been driven to an area with
a shallower slope angle. The warning screen and the audible alarm
will self-clear as the vehicle angle decreases (i.e. the operator does
not need to press Button 4 to clear it). The angle at which this
warning occurs varies with machine configuration as follows:
• MT503 with ROPS – 21°
• MT503 with Cab – 19°
6.6.4 WARNING SLOPE ANGLE – STOP CUT__________________________________
If the slope angle continues to increase the screen will display this
warning which indicates that the cutters have been switched off
and disabled. An audible warning will sound continuously for 4
seconds at 4 second intervals, and the red LEDs will flash
continuously for 4 seconds at 4 second intervals. This will continue
until the machine has been driven to an area with a shallower slope
angle. The warning screen and the audible alarm will self-clear as
the vehicle angle decreases (i.e. the operator does not need to
press Button 4 to clear it). The angle at which this warning occurs
varies with machine configuration as follows.
The angle at which this warning occurs varies with machine
configuration as follows:
• MT503 with ROPS – 24°
• MT503 with Cab – 21°
6.6.5 WARNING OIL PRESSURE FAULT ______________________________________
When this screen is shown, the engine oil pressure has decreased below
the normal level. If this happens during operation, or does not go off when
the engine is run at more than 1000 rpm. Stop the engine and check the
oil level. Top up if necessary.
If the fault persists, do not use the machine at all and contact your local
Ransomes Jacobsen dealer.
en-54
21
1/1
24
1/1
1/1
Advertisement
Table of Contents
