Introduction; Important; Product Identification - Ransomes Commander 3520 Safety, Operation & Maintenance Manual

2

INTRODUCTION

2.1 IMPORTANT _________________________________________________________

IMPORTANT: This is a precision machine and the service obtained from it depends on the way it is operated
and maintained.
This SAFETY AND OPERATORS MANUAL should be regarded as part of the machine. Suppliers of both new
and second-hand machines are advised to retain documentary evidence that this manual was provided with the
machine.
This machine is designed solely for use in customary grass cutting operations. Use in any other way is
considered as contrary to th e intended use. Co mpliance with and strict adherence to th e conditions of
operation, service and repair as specified by the manufacturer, also constitute essential elements of the
intended use.
Before attempting to o perate this machine, ALL operators MUST read through this manual and make
themselves thoroughly conversant with Safety Instructions, controls, lubrication and maintenance.
Accident prevention regulations, all other generally recognized regulations on safety and occupational medicine,
and all road traffic regulations shall be observed at all times.
Any arbitrary modifications carried out on this machine may relieve the manufacturer of liability for any resulting
damage or injury.
It is important that during the life of the machine wearing and replaceable parts are disposed of in an
environmentally responsible way using the resources available in the c ountry where it is used. There are
guidelines in this manual for the eventual decommissioning of the mower once it has no further use.
2006/42/EC
These are the Original instructions verified by Ransomes Jacobsen Limited

2.2 PRODUCT IDENTIFICATION

A Maximum front axle load in Kg (for machines being
driven on the highway)
B Gross weight (mass) in Kg
C Maximum rear axle load in Kg (for machines being
driven on the highway)
D Power in Kw
E Date code
F Machine type (Designation)
G Product code
H Product name
J Serial number
S P L
ERIAL LATE OCATION
The serial plate A is located on the chassis under the
operators seating position.
en-2
A B
C
Kg Kg Kg
F
H
A
West Road
Ransomes Europark
Ipswich IP3 9TT
England
E
D
Kw
G
J