Configuration
Software
The DTP2 R 212 can be easily configured using Extron Product Configuration Software
(PCS). This section describes the software installation and communication (see the
DTP2 R 212 PCS Help File for detailed control information). The topics covered in this
section are:
•
•
•
•
PCS communicates with the switcher via the following ports:
•
•
Software/Firmware Installation
Visit
NOTES:
1.
2.
Software/Firmware Installation
Connecting to PCS
Device Menu
Updating Firmware
Rear panel LAN Ethernet port (see
Front panel USB Configuration port (see
page 20)
www.extron.com
to download and install the PCS software.
•
Download the latest versions of software and firmware for your product.
An Extron Insider account is required to download and use the firmware or software
•
Hover over the Download link at the top of the page (figure 15,
Figure 15.
Software and Firmware Links on Download Screen
Click the appropriate link on the drop‑down list. The Download Center page opens.
For software, either click the Software link (
link directly (see the PCS Product Configuration Software link,
NOTE: If there is no direct link to your software, click the Software link (
For firmware, click the Firmware link (
LAN Connector Wiring
on page 13)
Connecting to the USB Port
1
) or, if the software is listed, click that
2
).
4
DTP2 R 212 Series • Configuration Software
on
).
).
3
).
2
23