Updating Firmware; Uploading Firmware To The Switcher - Extron electronics DTP2 R 212 Series User Manual

Updating Firmware

Firmware for the DTP2 R 212 can be updated using PCS or the internal webpage. Updates
to the DTP2 R 212 firmware are made available periodically via the
can find out what version of firmware is currently loaded on your switcher by entering
the SIS Q command via the RS‑232 or USB interface (see
page 45).
You can also see the firmware version with the internal webpage (see
page 56) and with PCS (see the DTP2 R 212 PCS Help File).

Uploading Firmware to the Switcher

NOTE: To load a new version of firmware to the switcher using the internal web
To load a new version of firmware to the switcher using PCS:
1.
2.
3.
4.
5.
6.
pages, see Firmware Panel
Connect a computer to the DTP2 R 212 via the front panel USB port (see
to the USB Port on page 20).
If computer does not have PCS installed, download and install PCS to the computer
Software/Firmware Installation
(see
If necessary, download the latest version of DTP2 R 212 firmware and install it on the
computer (see Software/Firmware Installation
Open PCS via the desktop Start menu, desktop icon, or toolbar icon. Unless changed
in the installation of PCS, make the following selection from the Start menu:
Start > All Programs > Extron Electronics > Extron Product Configuration
Software > Extron Product Configuration Software
The Product Configuration Software window opens to the Device Discovery
screen (see figure 31).
Figure 31. PCS Device Discovery Screen
Select the DTP2 R 212 (
1
Click Connect ( ).
2
The Product Configuration Software opens to the device page (see
page 33).
Query firmware version
on page 56.
on page 23).
on page 23).
) by clicking on it to highlight it in the list.
DTP2 R 212 Series • Configuration Software
Extron website. You
on
Firmware Panel on
Connecting
figure 32 on
32