Extron electronics DTP2 R 212 Series User Manual page 46

X$
= Video color bit depth mode
1 = Automatically based on sink EDID (default)
2 = Force 8‑bit
X%
= Input HDCP status
0 = No video detected
1 = Video detected with HDCP
2 = Video detected without HDCP
X^
= Output HDCP status
0 = No sink detected
1 = Sink detected with HDCP
2 = Sink detected without HDCP
X&
= Switcher name
The name can have up to 24 alphanumeric characters including hyphens (–), with
no spaces. The first character must be a letter, and the last character cannot be a
hyphen. The default is DTP2-R-212.
X(
= Verbose mode
0 = Clear/none (Ethernet default)
1 = Verbose mode (Serial and USB default)
2 = Tagged responses for queries
3 = Verbose mode and tagged responses for queries
X1)
= TMDS output format
1 = Auto (default)
2 = DVI RGB 444
3 = HDMI RGB "Full"
4 = HDMI RGB "Limited"
5 = HDMI YUV 444 "Limited"
6 = HDMI YUV 422 "Limited"
X1@
= Current EDID information in hexadecimal format (
X1#
= Native resolution and refresh rate from selected EDID (example: 1920x1200 @ 60
Hz)
X1$
= Analog audio lineout mode
1 = Lineout configured for variable
2 = Lineout configured for fixed (default)
X1%
= Audio output mode
0 = Stereo (default)
1 = Dual mono
X1&
= Pixel encoding mode for 4096x2160 @50/60 Hz 4:2:0 (for DTP2 input)
0 = Pass through as 4:2:0 (unmodified)
1 = Convert to 4:4:4
X1*
= Video input
1 = HDMI
2 = DTP
X1(
= Audio input
0 = None
1 = Auto (default)
2 = Digital (digital)
3 = Analog (analog)
X2)
= Video and sync mute
0 = Mute off (default)
1 = Mute on (clock/sync present but not video/TMDS)
2 = Mute on (no clock/sync or TMDS present on output)
X2!
= Video outputs 1 to 2
or bytes of hex data)
128 256
DTP2 R 212 Series • SIS Commands 38