Cec Control - Extron electronics DTP2 R 212 Series User Manual

CEC Control

CEC is used to provide control for multiple products, connected via HDMI cables, from a
single remote control. Alternately, one device, for example a Blu‑ray Disc player, can turn on
another device, such as a display, when put into Play mode.
CEC for the DTP2 R 212 can be configured via SIS commands (see Command and
on page 51) or PCS in the Control
Response Table for CEC SIS Commands
Config tab (see DTP2 R 212 PCS Help File).
DTP2 R 212 Series • Operation 22