Device Menu
The Device menu contains options pertaining to device connection, configuration, and
information. For details about all these options, see the DTP2 R 212 PCS Help File.
Figure 30.
Disconnect — Disconnects the device from the PCS program and close the Device
•
tab.
Settings — Opens a submenu with the following options:
•
•
Hardware Settings — Displays the Hardware Settings dialog box with device
information and side tabs to change the device name, internal clock, and password
of the connected device.
It also contains an Edit Communication Settings button, which provides an
alternative method of accessing the Communication Settings dialog box.
Communication Settings — Opens the Communication Settings dialog box to
•
change IP settings of the connected device.
Reset Device — Opens the Reset Device dialog box, with selectable modes for
•
resetting the connected device, as well as the Unit Information (also displayed in the
Hardware Settings dialog box).
NOTE: To comply with security requirements, the factory configured password on
this device has been set to the device serial number when it is shipped out. In the
event of a complete system reset, the password will revert to extron (see
and Permissions Panel
•
Update Firmware — Begins the process to upload and update the firmware to this
device.
•
DTP2 R 212 Help — Opens the DTP2 R 212 PCS Help File in a separate window.
About This Module — Opens the About This Module dialog box, with the PCS
•
module part number and version.
PCS Device Menu
on page 57 to change a password).
DTP2 R 212 Series • Configuration Software
Roles
31