Table of Contents
Advertisement
2.
Edit the network settings as desired:
a.
Click DHCP (
configures its IP address and other network settings from the DHCP server. The
default is Off.
b.
To set any of the addresses (IP Address (
address (
3.
When finished editing, click SAVE to confirm changes or CANCEL to close the window
without making changes. Clicking the X in the upper‑right corner of the screen also
closes the window without saving the changes.
Firmware Panel
The Firmware panel (see figure 41) displays the current firmware version and the date it
was last updated. Update the firmware on the DTP2 R 212 from this panel (see
Firmware Installation
To update firmware:
In the Firmware panel, click the
1.
SELECT FILE button.
In the Open dialog box, browse
2.
to locate the new firmware file on
your computer (by default the file
is stored at C:\Program Files (x86)\
Extron\Firmware\DTP2R212 after
being downloaded from the
website).
NOTE: Firmware files for DTP2 R 212 have a .eff extension. Do not attempt to load
any other file types.
3.
Double‑click the firmware file name.
The Open window closes, and the
selected firmware file name appears
in the Update Firmware panel on the
web page.
4.
Click UPDATE to begin (see figure 42).
To cancel the update, click the X
button in the Update Firmware panel.
During the updating process, a
window appears in the middle of the
screen,
showing messages giving the progress of the update: Initializing, Installing
the Firmware, and Rebooting Device.
When the update is completed, the message window closes and the message
Firmware Upload Complete appears near the top of the screen. The new firmware
filename appears beside Version in the Firmware panel.
) to toggle DHCP on and off. When DHCP is enabled (
2
), click in the desired field and enter the address.
5
on page 23 to download the firmware files).
Extron
), Subnet mask (
), and Gateway
3
4
Figure 41.
Firmware Panel
Figure 42.
Firmware Update Dialog Box
DTP2 R 212 Series • Internal Web Page
On
), the unit
Software/
56
Advertisement
Table of Contents
