Tcp/Ip Panel - Extron electronics DTP2 R 212 Series User Manual

TCP/IP Panel

The TCP/IP panel connects PCS to a specific device through Ethernet.
Figure 21.
1. Click the TCP/IP tab (see figure 21,
2. In the IP Address/Hostname field (
NOTE: The default IP address is 192.168.254.254.
3. In the Password field (
NOTE: The factory configured passwords for all accounts on this device have
been set to the device serial number. In the event of a complete system reset, the
passwords convert to the default, which is extron (see
Panel
4. In the Port field (
blank.
NOTE: Select the Show Characters checkbox (
characters.
5. Click the Connect button (
TCP/IP Panel
1
), enter the device password.
3
on page 57 to change a password).
), the port number or leave the field blank. PCS scans for the port if
4
). A new device tab opens.
6
)
), enter the IP address of the desired device.
2
Roles and Permissions
) to display the password
5
DTP2 R 212 Series • Configuration Software 26