Extron electronics DTP2 R 212 Series User Manual page 32

3. Scroll down to the alphabetic navigation bar (see figure 16).
Figure 16. Alphabetic Navigation Bar
4. Click the appropriate letter to locate the software or firmware.
5. Click Download and follow the on‑screen instructions (see figure 17 and figure 18).
NOTE: (Optional) Click Release Notes (
firmware update.
Figure 17. PCS Software Download
Figure 18. DTP2 R 212 Firmware Download
An executable (.exe) file is downloaded to the PC. Run this program to place the
firmware or software on the PC for future use. Make a note of the folder where the
firmware file was saved.
7. Install the software.
a. Navigate to the folder where the software file was downloaded.
b. Double‑click the executable file and follow the on‑screen directions to install the
software.
For firmware:
To install via PCS, see Updating Firmware
To install via the internal web page, see
) for more information about the
2
on page 23
Firmware Panel
on page 56.
DTP2 R 212 Series • Configuration Software 24