Table of Contents
Advertisement
Configuration
Software
The FOX3 SR 301/311 scaling receivers can be easily configured using Extron Product
Configuration Software (PCS). This section describes the software installation and
communication (see the FOX3 SR 301/311 PCS Help File for detailed control information).
The topics covered in this section are:
•
•
•
Software/Firmware Installation
Visit
NOTES:
1.
2.
3.
Software/Firmware Installation
Connecting to PCS
Software Overview
www.extron.com
to download and install the PCS software.
•
Also download the latest versions of software and firmware for your product.
•
An Extron Insider Account is required to download and use PCS. Contact an Extron
support representative, to obtain an Insider Account.
Mouse over the Download link at the top of the page (see figure 17,
Figure 17.
Software Links on Download Screen
Click the appropriate link on the drop-down list.
For software, either click the Software link (
directly on that link (see the PCS Product Configuration Software link
to
step 6
on page 33.
For firmware, click the Firmware link (
If there is no direct link to your software, click the Software link (
FOX3 SR 301 and FOX3 SR 311 Scaling Receivers • Configuration Software
) or, if the software is listed, click
2
).
4
2
).
1
) and skip
3
).
32
Advertisement
Table of Contents
