Extron electronics DTP2 R 212 Series User Manual page 53

Command
Information Requests
Request information
Request part number
Request model name
Request model description
Query firmware version
Query firmware version with build
KEY: X!
= Input number:
X@
= On/Off:
X#
= Auto switch mode:
X2)
= Video and sync mute:
Video Mute
Set video mute
Query video mute status
KEY: X2)
= Video and sync mute:
Input Audio Format Configuration
Set audio input format
Set audio input format for all
inputs
View audio input format
KEY: X1*
= Video Inputs:
X1(
= Audio input:
Output Audio Configuration
None/Disable
Pass digital audio
Pass analog audio
View setting
KEY: X4)
Audio output:
=
ASCII Command
(Host to Switcher)
I
N
1I
Verbose mode 2/3
2I
Verbose mode 2/3
Q
*Q
0 2
to
0
= Off, disabled, or undetected (default)
0
= Disabled (default)
2
= Enabled, lowest active input has priority
0 1
= Mute off (default) = Mute on (clock/sync present but not video/TMDS),
2
= Mute on (no clock/sync or TMDS present on output)
X2) B
B
0
= Mute off (default)
2
= Mute on (no clock/sync or TMDS present on output)
E I X1* * X1( AFMT }
E I X1( AFMT }
E I AFMT }
Verbose mode 2/3
1 2
= HDMI = DTP
0 1
= None = Auto (default)
E O0AFMT }
E O1AFMT }
E O2AFMT }
OA FMT
E }
Verbose mode 2/3
0
= Disable embedded audio on HDMI output
1
= Pass digital embedded audio on HDMI (default)
Response
(Switcher to Host)
X!• Ausw • •
In X# Vmt X2) Amt
X!• Ausw
• •
In X# Vmt X2) Amt
60-
]
1588-52
60- ]
1588-53
DTP2 R 212 Series]
Inf01*DTP2 R 212 Series]
DTP RECEIVER WITH BUILT IN HDMI AND DTP
Inf02*DTP RECEIVER WITH BUILT IN HDMI AND DTP
SWITCHING]
n.nn ]
n.nn.nnnn ]
1
= On, enabled, or detected
1
= Enabled, highest active input has priority,
Vmt X2)]
X2) ]
1
= Mute on (clock/sync present but not video/TMDS),
AfmtI X1* * X1(]
AfmtI X1(]
X1( • X1(]
AfmtI X1( X1(]
•
2 3
= Digital (digital) = Analog (analog)
Afmt O 0 ]
Afmt O 1 ]
Afmt O 2 ]
X4) ]
Afmt O X4) ]
2 =
Pass analog audio path
DTP2 R 212 Series • SIS Commands
Additional Description
]
X@
Non‑amp model
]
X@ * X@ Amp model (SA)
Non‑amp model
Amp model (SA)
SWITCHING]
Firmware build with 2 decimals.
0 = Disable embedded audio on
HDMI output
1 = Pass digital embedded audio on
HDMI (default)
2 = Pass analog audio path
45