Table of Contents
Advertisement
Removing an option card
Complete the following steps to remove an internal print server, Coax/Twinax Adapter, Parallel Interface Card, or Serial
Interface Card.
Warning:
Option cards are easily damaged by static electricity. Touch something metal on the printer before you
touch an option card.
1
Remove the system board access cover. For more information, see Accessing the printer system board.
2
Locate the option card.
3
Remove the screw that secures the card to the system board connector slot.
4
Gently pull the card out of the connector.
5
If you saved the metal plate that covers the connector slot and you do not plan to insert another card, attach the
plate.
a
Slide the clip side of the plate in first, making sure the clip end covers the groove on the system board.
b
Use the screw to secure the other end of the metal plate to the system board.
6
Place the card in its original packaging, or wrap the card in paper and store it in a box.
7
Replace the system board access cover. For more information, see Reinstalling the system board access
cover.
Removing a hard disk
Warning:
Hard disks are easily damaged by static electricity. Touch something metal on the printer before you
touch a disk.
1
Remove the system board access cover. For more information, see Accessing the printer system board.
2
Locate the hard disk.
Installing and removing options
Removing memory and option cards
23
Advertisement
Table of Contents
