Removing An Option Card - Lexmark Optra M410 User Manual

Removing an
Option Card
Warning!
The option card is
easily damaged by static elec-
tricity. Touch something metal
before you touch the card.
Before removing an option card, follow the steps under
"Accessing the Printer System Board" on page 201.
To remove an option card:
1
Remove the two screws on either side of the con-
nector slot located on the back of the printer.
2
Pull the option card straight out of the system
board connector.
3
Place the option card in its original packaging.
If you did not save the packaging, wrap the card in
paper and store it in a box.
4
Follow the steps under "Installing an
Option Card" on page 216 if you need to install an
option card. Otherwise, go to step 5.
5
Continue with "Closing the Printer System Board"
on page 220.

Removing an Option Card

219