Line 2 Messages - Lexmark Optra SC 1275 Service Manual

Line 2 Messages

Status Message
Supplies
Parallel
Serial x
Network x
LocalTalk x
Infrared x
Maintenance
2-10
Action
Toner is low, or a tray is empty or
missing. This message remains on
the operator panel until the supply is
replaced, or the tray is installed.
If you are unable to clear the sup-
plies message, see the "Supplies
Status Messages" on page 2-11.
The printer is locked to the printer
standard parallel port.
x is 1, 2, or 3 and represents the
serial port attached to option con-
nector x. The printer is locked to this
link.
x is 1, 2, or 3 and represents the net-
work card attached to option con-
nector x. The printer is locked to this
link.
x is 1, 2, or 3 and represents the
LocalTalk card attached to option
connector x. The printer is locked to
this link.
x is 1, 2, or 3 and represents the
infrared port attached to option con-
nector x. The printer is locked to this
link.
Maintenance is required for the
assembly shown. This message
remains on the operator panel until
the maintenance is completed.