Setting The Ip Address - Konica Minolta bizhub C3100i User Manual

You can use [Quick Setup] to connect to a wireless network when the following conditions are met.
 Your computer is connected to the access point or wireless router that you want to set on the
machine.
 The machine is not connected to another wireless network.
Depending on the environment you are using, there may be cases in which you cannot use [Quick Setup]

to connect to a wireless network.
 When specifying the encryption type as WEP and connecting to a wireless network, [Quick Setup] cannot
be used. Configure the wireless network settings from the operator panel and install the software with
[Custom Installation]. For details on wireless network connection settings, refer to "Manually Connecting
to a Wireless Network" (P.17) and for details on how to install software, refer to "Installing with [Custom
Installation]" (P.24)
For details on connecting and installing software using [Quick Setup], refer to "Installing Software for

Windows" (P.22).
Connecting Using Support Tools (Windows)
You can use the [Printer Software] support tool to configure wireless network settings. You can
connect to a wireless network with the support tools when the following conditions are met.
 Your computer is connected to the access point or wireless router that you want to set on the
machine.
 The machine is not connected to another wireless network.
1.
Extract [Printer Software] after downloading to the computer, and double-click on
"Launcher.exe" in the generated folder.
2.
Click on [Support Tools].
3.
Click on [Wi-Fi Settings].
4.
Follow the on-screen instructions to configure the settings.

Setting the IP Address

Setting the IP Address
This section describes how to set/change the IP address.
 When specifying an IP address for an IPv6 environment, use the [Printer Software] support tool or
Internet Services. For details on support tools, refer to "Configuring Settings with [Support Tools]
(Windows)" (P.21). For details on Internet Services, refer to "Internet Services Help" (P.137).
2.2 Connecting the Machine to a Computer
19