[Usb Port Settings] - Konica Minolta bizhub C3100i User Manual

[2-Sided]
Specify whether to print on both sides of a sheet of paper. For two-sided printing, specify whether
the printouts are bound at the long edge or short edge.
[Print Mode]
Select the print mode.
[PDF Password]
Set the password used to print PDF files protected by a password.
[Collation]
Configure the default setting to specify whether to produce output page by page or grouped by
batch when printing multiple pages multiple times.
[Output Size]
Specify the print paper size.
[Layout]
Specify a print layout.
[PDF Default Color]
Select the color mode.
[Detect Job Separator]
Specify whether to detect that a print job has been completed successfully.

[USB Port Settings]

Configure the machine USB port settings.
[Port Status]
Specify whether to enable the machine's USB port.
[Fixed Port]
Specify whether to use the same port as the one specified when the software has been installed.
[PS Data Format]
Specify the PostScript language compatibility transmission protocol.
[Job Timeout]
Set the amount of time the machine waits until the machine receives data from the computer. The
print job is canceled when the job is not printed within the specified time frame.
70
6 Changing the Machine Settings