[Protocol]; [Other] - Konica Minolta bizhub C3100i User Manual

[TCP/IP]
Configure the TCP/IP settings.
[IP Addressing]
Specify the method for acquiring an IP address.
[IP Address]
Display the IP address assigned to this machine. With [IP Addressing] set to [Manual Input], enter
the IP address.
[Subnet Mask]
Display the subnet mask assigned to this machine. With [IP Addressing] set to [Manual Input], enter
the subnet mask.
[Gateway Address]
Display the gateway address assigned to this machine. With [IP Addressing] set to [Manual Input],
enter the gateway address.
[Modem Speed]
Select the communication speed and the duplex settings of Ethernet.

[Protocol]

Specify whether to enable or disable each protocol.

[Other]

Configure the advanced network settings.
[IPv4 - Filter]
Specifies whether to restrict devices that can communicate with the machine. Range of IPv4 address
to allow communication with the machine can be set in Internet Services.
This feature does not apply to communication via Wi-Fi Direct.

[IPv6 - Filter]
Specifies whether to restrict devices that can communicate with the machine. Range of IPv6 address
to allow communication with the machine can be set in Internet Services.
 This feature does not apply to communication via Wi-Fi Direct.
6.8 [Network Settings]
61