Adjusting Print Head Density (Stripes) - Konica Minolta bizhub C3100i User Manual

9.
Select [Enter Correction Value], and press the
Once back at the Print screen, perform steps 2 - 5.

10.
Select the color requiring adjustment, and specify the correction value.
11.
Configure other colors as needed. Press the
12.
Repeat steps 2 - 7 as needed, printing a chart to check the adjustment results.
8.7

Adjusting Print Head Density (Stripes)

Print a chart to make adjustments when regularly patterned streaks (vertical lines) of dark and light
shading appear on print output. When striping occurs throughout, perform common correction.
When striping occurs in a specific 10.8 mm (chip), correct that chip individually.
Striping may occur in a specific chip for a specific color.

When no change occurs despite adjustment, it is necessary to restore the pre-adjustment value. Make a

note of adjustment values.
button.
button to return to the previous screen.
8.7 Adjusting Print Head Density (Stripes)
115