3
Using Your Machine
3.1
Using the Operator Panel
The operator panel comprises the display, Status LED, Ready LED,
Saver) button, <WPS> button,
For details on the Operator Panel, refer to "Operator Panel" (P.11).
Display Screens
There is a Print screen, which shows the status of the machine, and a Menu screen, for configuring
the machine's settings.
Messages appearing on the display will vary depending on options installed on the machine and settings
configuration.
Print Screen
Displays the status of the machine. When ready or printing, the Print screen display will appear as
follows.
Machine Status (Stand-by)
Ready
When connected via Wi-Fi, and
Remaining toner content marking will appear as follows. When the remaining toner content reaches 0%,
an error message will appear.
Remaining toner
content
100 - 81%
<Menu> button, NFC touch area and
LAN Status
K
Y
M
C
Toner Level
(Estimate)
when connected by Ethernet.
Remaining toner
content
80 - 61%
Machine Status (Printing)
Printing..
LPD
Data input port
Remaining toner
Remaining toner
content
60 - 46%
3.1 Using the Operator Panel
(Power Supply / Power
<Back> button, etc.
Tray1
Paper tray
Remaining toner
content
content
45 - 31%
30 - 1%
27