[Ethernet] - Konica Minolta bizhub C3100i User Manual

[Device Name]
Enter the machine name that identifies the Wi-Fi Direct network with up to 32 alphanumeric
characters.
When you select the machine name on your mobile device, find the name specified here.
[Paired Device]
Displays the status of the Wi-Fi Direct connections.
[Disconnect All]
Disconnects all the Wi-Fi Direct connections.
[Reset passphrase]
Disconnects the Wi-Fi Direct connections and changes the passphrase.
[SSID]
Displays the name of the network to be identified by Wi-Fi Direct. It can be entered following
"DIRECT-XX" using no more than 23 alphanumeric characters. When selecting the name of the
network connection through a mobile device, the specified name will be displayed here.
[Passphrase]
Displays the passphrase. Enter the passphrase displayed here when you connect to the Wi-Fi Direct
network from your mobile device.
[Print passphrase]
Print the passphrase.
[Reset passphrase]
Disconnects the Wi-Fi Direct connections and changes the passphrase.

[Ethernet]

This setting can be configured when [Ethernet] is selected for [Network].

Configure the wired network settings.
[IP Mode]
Select the IP mode.
[Dual Stack]
Uses both IPv4 and IPv6 to specify the IP address.
[IPv4]
Uses IPv4 to specify the IP address.
[IPv6]
Uses IPv6 to specify the IP address.
60
6 Changing the Machine Settings