Check Modified Parameters - YASKAWA GA800 Series Technical Reference

4.6 Keypad Operation
3.
Push or
4.
Push or
5.
Push or
6.
Push or
The keypad will show the "End" message when the write process is complete.
◆

Check Modified Parameters

This procedure will show all parameters that are not at their default values. You can also use this procedure to quickly
access and edit changed parameters and is very useful when you replace a drive. When all parameters are at their
default values, the keypad will show "0 Parameters".
1.
Push (Home) to show the HOME screen.
Note:
• The keypad will show [Home] in the top right corner when the HOME screen is active.
• If [Home] is not shown on
2.
Push (Menu).
170
to select [Parameter Backup/Restore], then push
to select the item to delete, then push
to select [Erase (backup data of keypad)], then push
to select the data to delete, then push
, push (Back) to show [Home] on
.
.
.
.
.
YASKAWA SIEPC71061737B GA800 Drive Technical Reference